How to setup your terminal for Wireless ECR connection

Tip: Use the arrow keys on the terminal to scroll up/down through the menus. When changing settings, press the [OK] button to select, the arrow keys to browse options, and [OK] to confirm.

1. Swipe the Merchant Card (or press the [Menu] button, then Press [8] for the Merchant Menu and enter the 4-digit Merchant code. type: entry-hyperlink id: 30FQQreXRtxRln0kZnyqXR.)

2. Press [6] to open Parameter menu

3. Press [1] to open Change menu

4. Press [2] to open Communication menu

   1. Set Comm. Type to:

      • “Ethernet“ for terminal models DESK3500, Lane3000

      • “WIFI“, “Ethernet” or ”GPRS” for terminal model MOVE 3500

   2. Press the [Red] button to return to previous menu

5. Press [3] to open ECR menu:

   1. Set Comm. type to:

      • “Ethernet“ for terminal models DESK3500, Lane3000

      • “WIFI“, “Ethernet” or ”GPRS” for terminal model MOVE 3500

   2. Set ECR IP address to the one set by your ECR provider

   3. Set ECR IP Port to the one set by your ECR provider

6. Press the [Green] button and then the [STOP] button twice to save the settings

Your terminal is now connected with your cash register/ECR.

Note: For settings in your cash register/ECR please contact the provider of your solution.

Tip: Use the arrow keys on the terminal to scroll up/down through the menus.

1. Swipe the Merchant Card or press the [Menu] button, then Press [8] for the Merchant Menu and enter the 4-digit Merchant code. type: entry-hyperlink id: 30FQQreXRtxRln0kZnyqXR.

2. Press [6] to open Parameter menu

3. Press [1] to open Change menu

4. Press [2] to open Communication menu

   1. Set Comm. Type to:

      • “Ethernet“ for terminal models DESK3500, Lane3000, Lane3600 :

      • “WIFI“, “Ethernet” or ”GPRS” for terminal model MOVE 3500

   2. Press the [Red] button to return to previous menu

5. Press [3] to open ECR menu:

   1. Set Comm. type to :

      • “Ethernet“ for terminal models DESK3500, Lane3000:

      • “WIFI“, “Ethernet” or ”GPRS” for terminal model MOVE 3500

   2. Set ECR/TLS to “Yes”

   3. Set ECR IP address to 3.33.230.243

   4. Set ECR IP Port to 6001

6. Press the [Green] button and then the [Red] button twice to save the settings

Your terminal is now connected with your cash register/ECR through the Connect@Cloud solution.

Note: For settings in your cash register/ECR please contact the provider of your solution.