Turn on/off your terminal
ON:
Turn on the terminal by pressing the [Green] button, until a smiley appears.
OFF:
Press [MENU] and press number [9] to power off your terminal.
ON:
Turn on the terminal by pressing the [Power] button, until a smiley appears.
OFF:
Press [MENU] and press number [9] to power off your terminal.
ON:
Turn on the terminal by pressing the [Power] button.
OFF:
Press the [Power] button for 3 seconds and choose "turn off terminal".
ON:
Press the [power/*] key in the lower-left corner of the keyboard.
OFF:
Press the menu or [*] (star) button at the bottom left corner until the terminal turns off.
ON:
Press the power button on the left side of the terminal for about 2 seconds until the screen lights up and the terminal turns on.
OFF:
Keep the power button on the left side of the terminal pressed until a menu appears on the terminal's screen.
Choose whether you want to turn off or restart the terminal.
ON: The P300 powers on automatically when connected to a power source.
Connect the multifunction cable to the port on the bottom of the terminal.
Plug the other end of the cable into the USB power adapter, then connect it to a mains power outlet.
The terminal will boot automatically. Wait for the welcome screen to appear.
(Optional) If no Ethernet cable is connected, you will be prompted to connect to a Wi-Fi network.
OFF or Rebooting: To power off or restart the terminal, hold the Power Button for 10 seconds, the terminal will reboot automatically.
Was this article helpful?