How to connect terminal to Bluetooth

Note: To make the changes, you'll need your merchant card. (If you don't have your merchant card, please get in touch with our technical support).

Place your terminal in the base and do the following on the terminal:

Move3500B

1. Remove the terminal from the base station.

2. Click the (-) button on the terminal furthest to the left below the screen.

3. Swipe the Merchant card (press merchant code)

4. Click on Control Panel

5. Press Terminal Settings

6. Press Comm means.

7. Press Bluetooth

8. Click switch on (if not already on)

9. Scroll down and press Base.

10. Press Association

11. Press New Base and lay down terminal on the Base you want to connect to.

IWL250B

1. Remove the terminal from the base station

2. Click the (-) button on the terminal furthest to the left below the screen.

3. Swipe merchant card

4. Press [0] Telium Manager

5. Type password [4302]

6. Press [OK]

7. Press [3] Initialization

8. Press [2] Hardware

9. Press [4] Cradle setup

10. Press [1] Association

11. Select [1] NEW BASE to connect to a base the terminal has not been previously paired with.

12. The terminal will prompt to place it in the base it should connect to.

13. Press the [OK] button when the terminal displays [PAIRING SUCCESSFUL], indicating successful pairing.

14. The terminal will take a few seconds to connect.

Note! If the terminal is to be connected to a base it has been paired with before, you can choose SELECT BASE. It will display a list of bases the terminal has been previously connected to, then select the desired base for the terminal to connect to.

Place the terminal on the base and do the following on the terminal:

• Press [Menu]

• Press [8]

• Type service-code [7890]

• Press [1]

• Press [4]

• Press [1]

The terminal should now connect to the base unit.

The terminal cannot be paired with Bluetooth.

The terminal cannot be paired with Bluetooth.

The terminal cannot be paired with Bluetooth.