How to change paper roll on the terminal

Viking, OnePA and PSAM terminal

1. Lift the flap in the direction of the arrow.

2. To open the cover, slide it downwards in the direction of the arrow.

3. Insert the receipt roll as shown. Then close the cover in the direction of the arrow. Approx. 5 cm. of the roll should stick out when the cover is closed.

The receipt printer is now ready for use.

Castles

1. Open the paper roll cover.

2. Place the roll in the compartment as shown in the figure. The paper must be fed from underneath the roll.

3. Pull out some paper so that it overhangs from the top of the terminal and close the lid properly so that an audible ‘click’ is heard.

Note! The receipt is printed as empty in case the receipt roll case is left open or in case the paper is not correctly chosen or inserted in the wrong direction. Please check that the case lid is properly closed, that the roll is positioned correctly, and then try printing again.

Nets SmartPOS N950 terminal

1. Open the paper roll cover.

2. Insert the paper roll in the compartment following the directions shown in the picture.

3. Pull 5 cm of the paper until it protrudes from the compartment on the top of the terminal.

4. Close the compartment lid (an audible ‘click’ is heard).

5. Remove the excessive paper by tearing along the serrated edge.